ROCKBROS Heated Gloves Winter Warm Skiing Gloves Moto Touch Screen Waterproof Battery Powered

ROCKBROS Heated Gloves Winter Warm Skiing Gloves Moto Touch Screen Waterproof Battery Powered 

Type: Heated Gloves
Material: palm: 50% nylon+50% PU; back of hand: polyester; interior: polar fleece
Weight: about 750g (including a pair of batteries)
Size: M/L/XL
Voltage: 5V 4000mAh
Current: 1.5A
Heat conduction: composite fiber heating element

Product Feature

Extensive heat on the back of the hand and 5 fingers
rapid heating
3 temperature adjustable
fabricwind and water repellent
Composite fiber heating element
Soft and foldable

Function

1. Use in outdoor activities to prevent frostbite hands in low temperature climates
2. The heating body is made of high-performance composite fiber heating body that is resistant to folding and tensile strength.
3. High thermal efficiency, can be bent, and generate heat in a large area
4. Use rechargeable high-capacity high-performance lithium battery pack, which can be used about 300-500 times

Note

1. Please unplug the power supply in time when not in use
2. Do not pull the power cord too hard to avoid breaking
3. Avoid storing in overheated (over 40 degrees Celsius) humid or corrosive environments
4. When not in use for a long time, charge and activate the lithium battery once every three months and then store it in a dry environment at room temperature
5. Can not be washed directly in water. If it is dirty, wipe the surface of the glove directly with a brush or towel and air dry.
6. If you find that the surface of the lithium battery has bulging or other abnormal phenomena, please stop using it immediately.
7. This product needs to be equipped with a charging head by the customer

How to use lithium battery

1. Charge the lithium battery first: Take out the charging cable and insert the power jack of 2 lithium batteries. The first charging takes 12 hours, and the next charging is about 5-6 hours. When the lithium battery is charging, the three lights do not flash, it means that The lithium battery is fully charged.
2Remove the gloves, unzip the battery pocket, pull out the power cord, and insert the plug of the power cord into the circular jack on the lithium battery.
3 Put the lithium battery into the pocket of the glove where the battery is placed, close the zipper, put on the glove, and press the three-speed thermostat to use.